Welcome to BFA Tractors & Parts - We are Dealer & Manufactures for some of the best parts in Mini Pulling Tractor pulling.
We are authorized dealers for
Lawntech and Dick Cepek Tires
For the guys wanting to run fuel injected motors we offer rework of the wiring harness - when you get the harness back it will be stripped of unnecessary wiring, the anti rev will be bypassed, it can be hooked up to a toggle switch and the key switch from the bike is no longer needed - you will only need to hook up a couple of wires and the rest is plug and play
For anyone that uses the 60 series chain for the motor to the jackshaft we will adding to the following list of custom sprockets, here's the new list. These are case harden sprockets, not home made ones.
YAMAHA = 11, 12, 13 TOOTH
KAWASAKI = 11, 12, 13, 14, 15 TOOTH
SUZUKI = 11, 12, 13, 14, 15, 16 TOOTH
Pictures of some of the parts that we offer for sell
We are dealers for the following
Douglas Wheel - Real Wheels - Dick Cepek - Lawntec - Dyna2000 - Yoshimura - Sudco - Carb Parts Whse - Sprocket Specialist - Azusa -
We also offer chain and sprockets, do custom metal fabrication & sheet metal forming
MY CURRENT PROJECT
Farmin For Fun
Tractor is for sale upon completion
click on picture for enlarged picture
this is an in progress project - this tractor will be for sale at the completion - it will also have the original light bar with head light - the hood will raise and lower with an electric actuator - motor is a 2007 gsxr 750 that will run on fuel injection - steering will be like an original going down to a rack and pinion - tires will be lawntechs with 8" tri-ribs on aluminum wheels on the front - air cleaner will be mounted to the hood and exhaust will come thru hood will an original style muffler and flapper on it - hand throttle on steering column will operate the hand brake - seat is from a massey ferguson 135
- for info email me at suthrn@skhr.net or call Dave at 270-317-1034, leave message if I miss you and I'll call you back
THIS IS PICTURES OF THE CHAIN CATCHER THAT IS USED AT THE GRAYSON CO. PULLS
This has to be constructed out of at least 11ga - 1"x1" tubing or out of 1/4" plate steel - it needs to come behind the tires by 8" and have a 3"x3" skid plate mounted to the bottom at a maximum of 5" off the ground - the cross bar that connects the two sides has to be a minimum of 16" off the ground to the top - may be either bolted or welded to the tractor - anyone from an outside club will be able to pull 1 time before being required to have the catcher installed - any questions please call Homer Aubrey @ 270-259-3097
HOT ROD PULL
Friday, June 13, 2008
7:00 PM
Vanderburgh County Fair Grounds, Hwy 41 North, Evansville, IN.
1) 1250# 750cc 26-12-12 tires
2) 1300# any cc 26-12-12 tires
3) 1350# any cc 15" diameter wheel
4) 1400# any cc 15" diameter wheel
contact: Steve Bender @ 812-453-6663 with questions
HOT ROD PULL
Saturday May 31st, 2008
5:30 PM
Livingston County Fairgrounds
Smithland, Ky
One track will be pulling Hot Rods, 48 and 40 cubes - the second track will be pulling single cylinders
For more info contact Jim Bob Greer (270) 508-0877 on single cylinders
Jerry Rupcke (270) 928-9918 on Hot Rods, 40 and 48 cube
GCPA Pulling Schedule 2008
Leitchfield Ky
These dates start 5 pm
May 10th & 24th
June 14th & 28th
July 12th &26th
August 9th & 23rd
September 13th
These dates start 3 pm
Sept 27th ( Shop with a Cop charity pull )
October 11th & 25th
All fair pulls will be announced
For more info contact James Lee or Bylinda Aubrey at 270-259-3097
Des Moines Ia
Praire Tractor Pull
Spring Shoot Out
CLIPS OF TRACTORS PULLING
clip on tractor clip too open - might have to download Quicktime 7 player
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20
21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40
41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60
61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71
Pictures of 2 tractors we built
Ole Glory
Mike Hooks
John Deere - Larry Houck
Mr. T - Keith Tucker
Al Capone - Dave Melton
Blue Thang - John Holiday
Lil T - BFA Pullers
Suicidal Tendencies - Dave Melton
Kubota - Kenneth Mohler
Bubba - Dave Melton
Born to be Wild - Chase Mohler
Wheel Horse -Robert White
HOG WILD - Daryl
Other Tractors
This is a picture of our shop - we build alot of the parts in house for quality control
Please check out our left side bar for the parts & tractors that we offer for sale & build
To contact us
email: bfapullers@skhr.net
Dave:270-317-1034 or Keith: 270-765-2301
our mailing address is:
BFA PULLERS
320 EAST DIXIE HWY
ELIZABETHTOWN,KY 42701
Pictures of some of our toys that we build
For more pics of the Mini Choppers click here
GRAYSON CO. PULLING ASSOCIATION
Here is a link for anyone looking for a tapes of pulling events
Life & all it entails, generally is determined by how we look at it, Concentrate on what we can change & control instead of worrying about that which we can't, you may soon find out life isn't all that bad, remember there's always someone that's got it worse than you & they're still making do, it's all about attitude.
If all you ever do is the best you can then you've done something to be proud of! - ( Montgomery Gentry )
